The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is often a highly productive photo voltaic controller made for off-grid solar programs. Based on multiphase synchronous rectification engineering, it makes certain optimized Electricity conversion and procedure stability for a variety of photovoltaic (PV) purposes.
Key Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for outstanding photo voltaic Electrical power harvesting. Key features incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery life.
Liquid crystal display Display screen with serious-time information monitoring.
Multiple Load Control Modes which include handbook and timer.
Detailed Digital Protections from overcharging, about-discharging, shorter circuits, and reverse polarity.
Stage-by-Stage Manual to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the product variety and voltage rankings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick out a very well-ventilated, dry area near to the battery financial institution.
Safe the Tracer AN controller using the provided mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the More info Solar Cost Controller
Caution: Normally observe suitable security protocols and ensure the procedure is driven off just before connecting components.
Move one: Join the battery terminals on the charge controller (good to favourable, detrimental to damaging).
Stage 2: Connect the photo voltaic panel array on the PV input terminals.
Move 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Energy over the controller by connecting the battery 1st.
Use the LCD Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, light-weight Regulate.
5. Checking and Knowledge Logging
The Tracer AN Series supports serious-time monitoring utilizing the MT50 remote meter.
Data is often logged by way of the RS485 interaction port employing software program which include Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Situation one: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Change procedure parameters if needed.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how assures:
Bigger Effectiveness: Minimized Power losses through conversion.
Enhanced Dependability: Secure efficiency underneath variable loads.
More time Battery Everyday living: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Remarkable option for optimizing solar power era and increasing battery existence. By pursuing the above mentioned setup information, buyers can make sure greatest performance and method longevity.